Would you like the capacity to double the tonnes of products manufactured per shift but don’t have the budget or space to expand your facility? There’s a simple solution and it’s one that we have implemented for food and nutrition manufacturers that want to increase production. With most of our customers their one main regret they have is allowing their fear of change to get the better of them and not moving on this sooner. The outcome, savings and increased revenue completely out-weigh the initial investment and upheaval involved. The longer you put off the inevitable, the more revenue your business is losing so move now.
Learn how you can scale up manufacturing without facility expansion below.
An agile production system is a manufacturing approach that is designed to enable companies to respond quickly and efficiently to changing customer demands, product variations, and market conditions. Unlike traditional production methods that prioritise long, fixed production runs, agile systems are designed to deliver flexibility, enabling manufacturers to switch between recipes, batch sizes, and formulations with minimal disruption.
If your factory operators could do two things at once without compromising on quality, they’d do it, right? This is possible with a mobile system that uses IBCs (Intermediate Bulk Containers). For example, while your blender is mixing, the steps of pre-filling or formulation, then cleaning and packing can be actioned simultaneously. Many manufacturers forget to include the full operating times of production when adding up the minutes it takes to produce each batch. You need to ask how long it takes to fill your fixed mixer, to optimally blend your ingredients, the time taken to empty your mixer (packing) and then how long your mixer is off-line while in the process of thorough cleaning and validation before it’s back in operation.
In the diagram below see the huge increase in production that could be realized by using a flexible system. You can see how a fixed system is sequential, waiting for each step to take place one after the other. Whereas the IBC system enables processing steps to work in parallel, which means more production output per hour:
The other advantage of using the IBC systems is that it takes just a small footprint in the factory. For a simple, fill, blend, pack, clean system this can easily fit into a standard unit.
To find out exactly how long your actual processes take in your own facility, use our calculator to see how much more product you could be producing if using a flexible, IBC (Intermediate Bulk Container) system:
Making a change to increase your production, reduce equipment downtime, reduce your losses, improve your product quality and hygiene levels sounds great but as a manufacturer we understand that you need to know that this would work for your specific operations, recipe ingredients and product before investing.
This is why we offer the ability to follow a phased approach before you make that change. You can stop at any point in this staging if you feel that improvements can’t possibly be made. Likewise, we occasionally stop this process ourselves for manufacturers producing products that just don’t fit our system e.g. high bulk, low end materials that don’t need mixed, quality, hygienic, consistent batch production.
You tell us about your product, operations and facility layout and any issues you’d like to solve e.g. you’d like to increase your production levels but feel that your operators and processes can’t work any faster or more efficiently than currently. Or you need to drop an overnight shift.
If we feel efficiencies could be made, we’ll visit your site to walk your factory floor, take an audit to understand your business, chat to you and the operators that have hands on experience in the day to day running of your facility.
If you require proof that additional equipment or replacement equipment does work/fully mixes your specific materials, this stage can take place at one of our global testing facilities using your recipes and factory scale equipment. You can analyze your tested final product for the data you need. If you can’t make the trip you can dial in virtually and watch us conducting the tests for you.
Over the decades we have collated vast amounts of data on products produced around the world, so this archive can be tapped into to see any similarities with your ingredients and how challenges have previously been overcome and efficiencies made.
Set your goals of what you’d like to achieve and by what time e.g. double tonnes of product by next year / increase ROI by X etc. We can run the maths for you and recommend a system to achieve your goals.
We create a road map of your current state compared to how your future state could look. We can offer Engineering design and layouts so that you can visualize what the system would look like.
If you wish to implement any additions / replacements to your current operations, a gradual introduction can be installed or a total switch, if preferred.
Every customer is different, from the size, type, location of their facility to the current system they have in place. The product recipe is always different down to the origins of the source materials and logistics to particle size and texture of your powders. Therefore, a thorough investigation is advised before any changes to processing or equipment take place.
Read this customer’s story on how implementing an agile production system has generated an instant return on investment such as:
Download the Case Study by clicking below.
This is part 1 of our series. Part 2 explains increasing productivity without facility expansion.
When investing in equipment for long-term growth, manufacturers should assess flexibility and scalability, process fit with their materials, quality and hygiene performance, changeover and cleaning requirements, and long-term operational performance. The right choice depends on products, materials, batch profile and growth plans, not just initial throughput.
Flexibility and scalability: can it handle changing ranges, formulations and batch sizes?
Process fit: does it cope with material behaviour such as bridging as volumes grow?
Quality and hygiene: does it protect blend homogeneity and reduce contamination risk?
Changeovers and cleaning: how much downtime does each transition cost?
Operational performance: material handling, waste and asset utilisation over time.
Before introducing a new powder recipe, food manufacturers should assess the material across its full handling path, from blending through transfer, discharge and packing. Key checks are blend integrity, cleaning and cross-contamination risk, recipe and equipment fit, and the impact on changeover time and batches per shift.
Blend integrity: could handling or discharge cause segregation, rework or rejection?
Cleaning: could residue or allergens from a previous batch compromise the new product?
Equipment fit: does the recipe need liquid addition, high-shear processing, or handling of powders that bridge?
Changeover impact: how will cleaning and idle time change?
Where powder behaviour is uncertain, test the actual materials under simulated working conditions.
Future-proofing a food manufacturing process means planning equipment, capacity and operations around likely future changes, not just today's production. That includes new recipes, expected batch sizes and volumes, shorter lead times and future ingredient properties, so the operation can absorb more variants and changeovers without relying solely on adding volume.
Start with a growth forecast, then check the process can maintain quality, allergen control and efficient cleaning as variety increases. Consider whether ingredients are sticky, free-flowing or prone to separating during handling.